EN Attach 120mm Fan Mounting Plate to the Pump’s four rubber dampers using enclosed M4 thumb screws D Mit beiliegenden M4 Rändelschrauben befestigen
EN Repeat the procedure on CPU water block EN Repeat the procedure on the Pump/Reservoir Unit. Screw in the fitting on the outlet (pressure) port.
EN And fill in whole content (100mL) of the water additive concentrate EN Open top of the reservoir combo EN Fill in the ready liquid about 2 cm fr
EN Cover all exposed hardware with a towel or paper towels EN Take a container and hold the pump reservoir combo above it. EN Unscrew the G1/4 pl
EN CPU Water Block with AMD plate EN CPU Backplate mechanism EN Radiator D CPU Wasserkühler mit AMD Montagehalterung D CPU Backplate D Radiator
- - - - - - - - - - - - - - - - - - - - - -
STEP 1: PREPARING THE CPU WATER BLOCK: The water block provided with this kit is EK-Supreme LTX UNI. This water block is pre-assembled for use with
STEP 5a: Intel LGA-775, -1366 and AMD socket motherboard: 1) Place motherboard on an even surface with front facing down. 2) Install backplate rubber
EN Open PC case/chassis and remove stock fans EN Mark all the holes you need to mount the motherboard. EN Screw in the motherboard mounting stando
EN To mount the radiator on the back of the case use EK-UNI RAD Holder. EN Use 2,5mm black plastic standoff and M3x35mm screws to mount the radiat
Commentaires sur ces manuels